546 - Anti-vibration bell support with anti-tear - Square base - load up to 5.556 daN

The BELL anti-vibration mounts WITH ANTI-TEAR, consisting of two galvanized steel reinforcements with a natural rubber core between them, are designed for dynamic applications capable of supporting high loads in the three directions, with very limited yielding.
In normal speed situations of about 1600 rpm, our series reaches an insulation degree of 74/85%. Thanks to the tear-resistant structure with elastic hooking, the bell-type anti-vibration mounts guarantee high resistance and safety even when used in mobile equipment.

Characteristics
COMPOUND MATERIAL: Natural Rubber
METALLIC STRUCTURE MATERIAL: Galvanized Steel
RUBBER HARDNESS: 60 Sh (customizable)

APPLICATION: Static and dynamic applications – power generators, engine mounts, machinery, marine, excavators, compactors, asphalt pavers and agriculture.

Part number	A	B	C	H	E	F	G	M	Deflection (mm)	Hardness (Sh A)	Static Load MAX (daN)
546132514516NI	150	132x132	13	51	168	168	4	M16	4	45	1.800
546132516016NI	150	132x132	13	51	168	168	4	M16	4	60	2.500
546132517016NI	150	132x132	13	51	168	168	4	M16	4	70	3.825
546132514520NI	150	132x132	13	51	168	168	4	M20	4	45	1.800
546132516020NI	150	132x132	13	51	168	168	4	M20	4	60	2.500
546132517020NI	150	132x132	13	51	168	168	4	M20	4	70	3.825
546150634520NI	175	150x150	13	63	181	181	4	M20	7	45	3.461
546150636020NI	175	150x150	13	63	181	181	4	M20	7	60	4.655
546150637020NI	175	150x150	13	63	181	181	4	M20	7	70	5.556
546150634516NI	175	150x150	13	63	181	181	4	M16	7	45	3.461
546150636016NI	175	150x150	13	63	181	181	4	M16	7	60	4.655
546150637016NI	175	150x150	13	63	181	181	4	M16	7	70	5.556